Reality Capture Training Courses

This course includes training for software and hardware.

• Hardware & Software
• Course duration: 1 Day
• Course Code: HDS-001

Course Agenda

1. Hardware Introduction
   1. BLK360 Instrument overview & hands-on session.
   2. FIELD360 App overview & hand-on session.
   3. Practical Session, scan & register on site.
   4. Best practise for laser scanning on site.
   5. Evaluation of knowledge & skills.
      
      
2. Software Workflow
   1. REG360 Software overview & navigation.
   2. Menus & software setup.
   3. Create registration & deliverable.
   4. Practical workflow review (Scan, Register & deliverable)
   5. Troubleshooting a registration
   6. Storage & archiving.
   7. Jetstream Viewer LGS file.
   8. Evaluation of knowledge & skills. Summary & Questions.

With this training course, we will teach you how to use the equipment and understand the fundamentals of laser scanning. You will get an opportunity to register (piece together) scans, check the quality of the alignment and produce an LGS file. We will also cover other export formats and provide the simplest straight-line process from field to finish.

By the end of this course, you will be able to confidently use the equipment and software to achieve a registered pointcloud model.

This course includes training for software and hardware.

• Hardware & Software
• Course duration: 1 Day
• Course Code: HDS-002

Course Agenda

1. Hardware introduction
   1. RTC360 Instrument overview & hands-on session.
   2. FIELD360 App overview & hand-on session.
   3. Practical Session, scan & register on site.
   4. Best practise for laser scanning on site.
   5. Evaluation of knowledge & skills.
      
      
2. Software workflow
   1. REG360 Software overview & navigation.
   2. Create registration & deliverable.
   3. Practical workflow (Scan, Register & deliverable).
   4. Troubleshooting a registration.
   5. Storage & archiving.
   6. Jetstream Viewer LGS file.
   7. Evaluation of knowledge & skills. Summary & Questions.

With this training course, we will teach you how to use the equipment and understand the fundamentals of laser scanning. You will get an opportunity to register (piece together) scans, check the quality of the alignment and produce an LGS file. We will also cover other export formats and provide the simplest straight-line process from field to finish.

By the end of this course, you will be able to confidently use the equipment and software to achieve a registered pointcloud model.

• Hardware & Software
• Course duration: 1 Day
• Course Code: HDS-003

Course Agenda

1. Hardware Introduction
   1. BLK360 Instrument overview & hands-on session.
   2. BLK2Go App overview & hand-on session.
   3. Practical Session, scan & register on site.
   4. Best practise for laser scanning on site.
   5. Evaluation of knowledge & skills.
      
      
2. Software Workflow
   1. REG360 Software overview & navigation.
   2. Menus & software setup.
   3. Create registration & deliverable.
   4. Practical workflow review (Scan, Register & deliverable)
   5. Troubleshooting a registration
   6. Storage & archiving.
   7. Jetstream Viewer LGS file.
   8. Evaluation of knowledge & skills. Summary & Questions.

With this training course, we will work through the software and teach you how to import files and process them. You will gain a fundamental understanding on how the software is structured and how to best set it up for your day-to-day use. Once completing the imported data, you will receive training on how to process (register/piece together) the scans. The final step is to quality assure your work and produce an LGS file.

By the end of this course, you will be able to confidently use the software to import and process scan data to achieve a registered pointcloud model.

• Software only
• Course duration: 1 Day
• Course Code: HDS-004

Course Agenda

1. Software Workflow
   1. REG360 Software overview & navigation.
   2. Menus & software setup.
   3. Create registration & deliverable.
   4. Practical workflow review (Scan, Register & deliverable)
   5. Troubleshooting a registration
   6. Storage & archiving.
   7. Jetstream Viewer LGS file.
   8. Evaluation of knowledge & skills. Summary & Questions.

Our advanced training course will cover a range of different aspects within the software, including advanced UCS setups, cleaning the pointcloud data and understanding the values & settings on the menus. You will also receive training on how to manage large datasets, configure your archives and how to get the best performance out of your software.

By the end of this course, you will have a full understanding on how the software is structured, confidently clean and use the software to its’ full capacity.

• Software only
• Course duration: 1 Day
• Course Code: HDS-005

Course Agenda

1. Software Workflow
   1. Cyclone REG360 overview.
   2. Cyclone REG360 Settings & preferences.
   3. Simple Target Based Registrations.
   4. Simple Cloud to Cloud Registrations.
   5. Advanced Registration Techniques
   6. Visual alignment & Merging registrations with control.
   7. Other Methods – Smart Align / Auto Align.
   8. Advanced UCS Creation & Reporting
   9. Tips & Tricks for registration troubleshooting
   10. Workflow discussion and planning
   11. Evaluation of knowledge & skills. Summary & questions.

With this training course, we will work through the software and teach you how to import files and process them. You will gain a fundamental understanding on how the software is structured and how to best set it up for your day-to-day use. Once completing the imported data, you will receive training on how to process (register/piece together) the scans. The final step is to quality assure your work and produce an LGS file.

By the end of this course, you will be able to confidently use the software to import and process scan data to achieve a registered pointcloud model.

• Software only
• Course duration: 1 Day
• Course Code: HDS-006

Course Agenda

1. Software Workflow
   1. REG360 Software overview & navigation.
   2. Menus & software setup.
   3. Create registration & deliverable.
   4. Practical workflow review (Scan, Register & deliverable)
   5. Troubleshooting a registration
   6. Storage & archiving.
   7. Jetstream Viewer LGS file.
   8. Evaluation of knowledge & skills. Summary & Questions.

Our advanced training course will cover a range of different aspects within the software, including advanced UCS setups, target-based registrations, cleaning the pointcloud data and understanding the values & settings on the menus. You will also receive training on how to manage large datasets, configure your archives and how to get the best performance out of your software.

By the end of this course, you will have a full understanding on how the software is structured, confidently clean and use the software to its’ full capacity.

• Software only
• Course duration: 1 Day
• Course Code: HDS-007

Course Agenda

1. Software Workflow
   1. Cyclone REG360 overview.
   2. Cyclone REG360 Settings & preferences.
   3. Simple Target Based Registrations.
   4. Simple Cloud to Cloud Registrations.
   5. Advanced Registration Techniques
   6. Visual alignment & Merging registrations with control.
   7. Other Methods – Smart Align / Auto Align.
   8. Advanced UCS Creation & Reporting
   9. Tips & Tricks for registration troubleshooting
   10. Workflow discussion and planning
   11. Evaluation of knowledge & skills. Summary & questions

This training course is specifically designed for existing legacy customers, who are using Cyclone REGISTER Core/Classic and would like to migrate and use Cyclone REGISTER 360. We show you how to adapt your workflows to REGISTER360 and how to do most, if not all, of the existing steps within the new package. You will receive training on how the software is structured, how to register and understand the menus. We will also customise each course based on your specific workflows to ensure you have a great kick-off start on this amazing software.

By the end of this course, you will have a full understanding on how the software is structured, and how to confidently use it moving forward on your transition/migration journey.

• Software only
• Course duration: 1 Day
• Course Code: HDS-008

This is legacy training, which will soon be phased out – but for existing users of Cyclone Core/Classic, this training is to teach users how to use the software to import, register and export/publish a point cloud model.

By the end of the course, you will understand how the software is structured, how to setup a database and import data. You will also be able to produce the exported file format LGS.

• Software only
• Course duration: 2 Day
• Course Code: HDS-009

Course Agenda

1. Day 1 Part 1
   1. Instrument overview & hands-on session.
   2. Practical Session, scan & register.
   3. Best practise for laser scanning on site.
   4. Evaluation of knowledge & skills. Summary & Questions.
      
      
2. Part 2
   1. Cyclone overview – Activity
   2. Cyclone Settings & preferences.
   3. Cyclone navigation.
   4. Simple Target Based Registrations.
   5. Simple Cloud to Cloud Registrations.
      
      
3. Day 2 Part 1
   1. More complex registration.
   2. Visual alignment & Merging registrations with control.
   3. Other Methods – Smart Align / Auto Align.
      
      
4. Part 2
   1. Tips & Tricks to troubleshoot & fix registrations
   2. Scanner calibration check.
   3. Workflow discussions & overview.
   4. Evaluation of knowledge & skills. Summary & Questions.

This training course is for users of either AutoCAD or BricsCAD, who would like to understand how the menus and features work within the software. Cloudworx is a plugin for AutoCAD/BricsCAD/Revit/Bentley/Navisworks/Solidworks/etc. We will 92teach you how to use an LGS file with the Cloudworx plugin to cut/slice the pointcloud visibility, to accurately model or extract relevant data for your final deliverable.

By the end of the course, you will know how to use the tools, along with your CAD skills to produce fast and accurate models.

• Software only
• Course duration: 1 Day
• Course Code: HDS-010

Course Agenda

1. Cloudworx Essentials
   1. Lesson 1 - Project menu.
   2. Lesson 2 – Rendering.
   3. Lesson 3 – Orientation.
   4. Lesson 4 – Work plane.
   5. Lesson 5 – Clipping.
      
      
2. Cloudworx Advanced
   1. Lesson 1 - Smart Pick View Port.
   2. Lesson 2 - Points on Grid.
   3. Lesson 3.1 - Quick Slice & Auto-Fit Polyline.
   4. Lesson 3.2 - 2Point Polyline.
   5. Lesson 3.3 - Fit Section.
   6. Lesson 4 – TruSpace.
   7. Lesson 5 - Patch Fitting.
   8. Lesson 6 - Steel Modelling.
   9. Lesson 7 - Fit Pipes, Connect Pipes & Flanges.
   10. Lesson 8 - Floor Flatness.
   11. Lesson 9.1 – Clash.

In this training course, we cover basic navigation and setup of the software. We teach you how to use the software to clean and separate pointcloud data in preparation for analysis or meshing.

By the end of the course, you should be able to navigate the software, import an LGS file and convert it, and create a basic mesh.

• Course duration: 1 Day
• Course Code: HDS-011

Course Agenda

1. Cloudworx Essentials
   1. Lesson 1 Cyclone 3DR Basic settings
   2. Lesson 2 Converting a project
   3. Lesson 3 Navigation
   4. Lesson 4 Clean / Separate points / with limit objects
   5. Lesson 5 Meshing Workflow

In this course we teach you skills to extract and measure shapes, line sections and how to do surface analysis. This will include creation of reports.

This course will conclude by the user being able to successfully extract shapes, line sections and produce reports on surface analysis.

• Course duration: 1 Day
• Course Code: HDS-012

Course Agenda

1. Cloudworx Essentials
   1. Lesson 1 Extracting Geometric Shapes
   2. Lesson 2 Measurement and Volumes
   3. Lesson 3 Sections
   4. Lesson 4 Surface analysis
   5. Lesson 5 Reporting

This course is always preceded by a meeting with the customer regarding their specific workflow requirement. We the build a dedicated workflow to suit your requirements.

A user that attends this course will have a basic/fundamental understanding prior to receiving this training, but by the end will confidently be able to achieve the required workflow.

• Course duration: 1 Day
• Course Code: HDS-013